The bottle scraper : for those in a hurry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you don't feel like scraping your windshield for too long
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
How to use ?
- Just fill a plastic bottle with water (a bit warm is preferable, but don't go for too hot, aim for room temperature or slightly above)
- If your windshield is in bad condition and the water is too hot, it might lead to your windshield cracking/shattering because of the temperature shock
- Screw the bottle on it which has the right thread (there seems to be different ones)
- let the magic happen (but make it happen, too !)
- leave for work on time
Description
When i need to scrape ice on my windshield i often go for the fast solution : dump warm (but not hot) water on the windshield and turn on the wipers to scrape most of it
I decided to create a scraper on which i can screw a bottle for convenience
Tried to make it as ergonomic as i could with my 3D designing skills (which are not a lot)
How to print ?
Use the material of your choice, Mine was made with PETG, 0.4mm nozzle, 0.2mm height
Print with the “scraping part” facing down, no supports should be needed, the bridges on the bottom are for water channels and don't need to be perfect, while the top cone doesn't have much overhang so it should be fine
Print was made in ~3hrs on an Ender 3 S1 Pro