Ryobi Vac Attack adapter for Worx LeafPro Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to directly connect a Worx WA4054.2 LeafPro collection hose to a Ryobi Vac Attack mulching leaf vacuum.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 162
- Wydruki
- 2
- Wyświetlenia
- 795
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
An adapter to directly connect a Worx WA4054.2 LeafPro collection hose to a Ryobi Vac Attack mulching leaf vacuum. The vac attack needs to be modified by cutting off the curved part of the discharge chute as shown, roughly 2 inches from base. Model has holes for M5x8mm screws to secure adapter. Use the adapter to drill pilot holes into the chute in the right locations and then enlarge the holes for the screws to secure adapter to the chute.
A second adapter is included with a similar fitup to the chute. This will restore the forward discharge direction if you want to switch back to the factory bag on occasion.
The walls are about 2mm thick currently. The adapter feels solid when installed but seems a bit flimsy on it's own. Thicker walls could make it a bit more robust. The transition zone is pretty short. Elongating this section might be beneficial to improve the flow.