Holder for aquarium level controller hose (and narrow clearance between top glass and the sides)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this because on my Dennerle Nano Cube the original hose clip of my Tunze Osmolator nano didn't fit without…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 1160
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this because on my Dennerle Nano Cube the original hose clip of my Tunze Osmolator nano didn't fit without lifting the lid.
So I made a thing which needs only 5mm clearance between the top and side glass.
Just press fit the hose into the holder and fix it with a cable tie.
if you are frightened of the hose may fall out, you can use a drop of hot glue to keep it there.
Then use the screw to fix the assembly to the aquarium glass (max. 5.5mm)
Use the holder_in for 0.25in hose and the holder_mm for the 6mm
have fun :-)
I designed this as part of my Aquarium mod series:
published project parts so far:
- Fluval Flex Cooling Fan Adapter 40mm
https://www.thingiverse.com/thing:3640543 - Fluval Flex Cooling Fan Adapter 80mm
https://www.thingiverse.com/thing:3671625 - Fluval Flex Filter Mod
https://www.thingiverse.com/thing:3639353 - Suction cup temperature sensor mount for DS18x20
https://www.thingiverse.com/thing:3640844 - water level controller hose clip for Fluval Flex filter compartment
https://www.thingiverse.com/thing:3675744Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.1 / 0.15
Infill:
40+
Filament:
N/A PETG N/A
Category: Hobby