Gridfinity Mount for U.S. Peg Board - Up to 3x6 - No Supports!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put Gridfinity on your U.S. peg board with this strong mount. Generate any size from 1x1 to 3x6 with OnShape.
- Ocena
- 5 / 5
- Polubienia
- 136
- Pobrania
- 609
- Wydruki
- 6
- Wyświetlenia
- 4638
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Place on the bottom face when slicing!!!
This model is easily printable without supports as long as you place it on the face of the bottom support (the hypotenuse of the right triangle) in your slicer.
Put the Gridfinity organization system up on your peg board!
You can use the OnShape document to generate any size from 1x1 to 3x6 right in your browser without having to create an account. I've attached some sizes I subjectively consider the most useful as STLs here.
You'll also need to print a few pegs from AimeBuilder's Universal Peg Board Peg System and insert them into this mount.
Generating custom STLs with OnShape
You can generate more sizes, adjust the outside lip, and choose your own number of peg slots and their spacing.
- Navigate to the OnShape project.
- Adjust the configurations in the top left corner.
- Right click on the ‘pegboard-mount’ tab in the bottom left corner and click ‘Export’
- Choose your desired file type and adjust any other settings, then hit ‘Export’. Your file will be downloaded automatically.
