Breville/Sage Single Dose Hopper With Groove for Bellows
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a remix of the model remixed by Newske, to fit the bellows. This is only one part of the model, go to the…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 828
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a remix of the model remixed by Newske, to fit the bellows.
This is only one part of the model, go to the original for the rest of the parts.
Bellows are from AliExpress. From the descriptions I've seen on Ali it should still be within spec of the elastic expansion and keep the bellow nice and snug. I can't say anything about the hight of the groove being as snug as it is here.
Please veryfy the measurements of model fit the bellows.
!If you order the stand-alone hopper from ali, make sure to download the Hopper With Bellow Groove Stand Alone Hopper v2.stl, it should in theory fit. This is not the model pictured and I haven't tested it. But it should work.
All the settings and everything of the original model still apply here. There you will also find the base and pin files needed to complete the hopper.
Note to make sure the widest part of the model is facing down and print with supports.
Bellow used for Hopper_With_Bellow_Groove.stl is:
aliexpress.com/item/1005003854994716.html.
These are not the same as the bellow only products on ali
Category: Kitchen & Dining