Small Parts Tray for Repairs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 200x200mm tray with 4 small compartments for screws or similar. Don't loose your small screws while tinkering!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to do a couple of small part repairs and with the first part already lost a screw. So I fired up FreeCAD and cadded myself a small parts repair tray. The whole part is 20cm x 20cm and should fit on almost any FDM printer. The four small compartments at the top allow you to store screws or other small parts, while the large tray allows you to disassemble whatevery you are working on without fearing for screws to fall down and never be seen again.
Prints without support.
As always, Source Files included.