Prusa enclosure door knob and hole plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa enclosure door knob and addons to create more of seal and retain heat better inside.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 757
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Enclosure
These parts were designed for a common enclosure used with the MK2/MK3S printer
https://www.matterhackers.com/store/l/prusa-mk2mk2smk3-enclosure-kit/sk/MAT36S9V
Vent/Hole Plugs
I designed these vent and hole plugs to create more of a seal for this enclosure.
Small Panel Replacement
I created a replacement panel for one of the openings on the enclosure where the printer wires can be routed through.
Enclosure Door Knob
I also created a door knob for the enclsoure door since it does not come with one. This door knob is printed in 2 parts and screwed together through the hole in the enclsoure door.
Enclosure Door
I would also recommend gluing strong magnets to the enclosure door exterior and the enclosure interior wall so the door stays shut tightly.