Hypnotic Optical Illusion for Prusa MK4 X-Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the remix version of the Prusa MK3S+ X-Axis Optical Illusion made by Thomas H 3D for the MK4.
- Ocena
- 4,875 / 5
- Polubienia
- 38
- Pobrania
- 165
- Wydruki
- 9
- Wyświetlenia
- 1021
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't fit the connector from the original version made for the Prusa MK3S+ on the X-Axis of my Prusa MK4 so I modified the original model to fit in the gap between the X-Axis pulley and the motor holder. For the one I printed and end up using I chose the 50 mm diameter wheels, but you can go to the original model, download and print the size that fit you most. Thank you Thomas for the original design. A simple but beautiful add on for your 3D printer.
Print Instructions
I use PETG but I guess PLA will work too.
Designed to be printed with 3 perimeters.
10% rectilinear infill. Some users have reported issues with 10% infill and have used 100% instead.
No support.
Before putting the pieces together, test the axis connector fit.
(Copy/Paste from the original post).