Keybow 2040 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple two part case for the Keybow 2040 - the two parts press fit together and hold - no glue required. Both parts print without supports as the top of the cutouts can be bridged.
Designed to hold the Keybow 2040 without the rubber feet attached to the bottom of the Keybow (the feet can be used on the base of the case instead if you want). I've tested with a couple of USB C cables, but the cutout may be too tight for a particularly large USB C plug.
To prevent accidental activation, the BOOTSEL and Reset buttons require a tool to be pressed through the case cutout (small screwdriver, phone SIM eject tool, etc…).