Organic Ice Scraper PACK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Four variants of organic ice scrapers
- Ocena
- 4,25 / 5
- Polubienia
- 98
- Pobrania
- 285
- Wydruki
- 5
- Wyświetlenia
- 2444
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi everybody.
I think that it is necessary to print in 3d what is impossible or very difficult to do in other ways. Based on this principle, I made a set of organic-shaped windshield scrapers.
Any standard filament will do. The outer contour is 3-4 lines, the bottom is 4 or more layers, filling is 20%.
The shape of the work surface will allow you to better bite into the ice and crumble it. The shape of the handle is the best grip.
Winter has come.
Good luck to everyone!
v2.
According to KefirrMM, one of the models has been modified, now it can scrape even thin ice, because it has almost no bottom, see OIS_Big_1_v2_Hole and OIS_Big_1_v2 _Hole_ narrow - a variant with a smaller base size. Just in case, for adhesion when printing, add bream, otherwise the printing settings do not change.