1 / 7
Bottle Drainer (21 mm, 25 mm and 53 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy way to drain bottles with 53 mm, 25 mm or 21 mm diameter.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 107
- Wydruki
- 3
- Wyświetlenia
- 391
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
The bottle drainers by Ataris (16 mm) and buffhunter (42 mm) are wonderful, but I needed additional diameters. Therefore this is a simply remix for diameters of 21 mm and 53 mm.
I recreated the design by buffhunter in Onshape for the big version.
For the small version, the “window” is missing.

EDIT 13.01.2024
Added a 25 mm version.
Print Instructions
Print in PLA… nothing special. Don't drain bottles with hot water though…
Modifications welcome
You can remix or download the cad file from onshape.
Just select the big or small version in the tab and change the width variable.
