1 / 6
Wall mount adapter for the Bluebrixx Star Trek Runabout set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount adapters to mount the Star trek Runabout set from BlueBrixx in a 45 degree angle using KEA SIBBHULT
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
The two parts fit into the studs on the underside of the BlueBrixx Star Trek Runabout set
and onto IKEA SIBBHULT wall brackets (18x18cm)
With these you can mount the set in a 45degree angle to a wall.
4 M4 screws and nuts are needed to secure the the connection between the parts and the wall brackets.
1 M4 nut must be place into the print during printing
I also added an optional “battery holder” I use to hold the battery pack powering the LEDs I added to the set