SCX24 C10 Front Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a higher-clearance plate-style front bumper for the SCX24 C10. It does require trimming the front of the body…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 145
- Wydruki
- 2
- Wyświetlenia
- 1235
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a higher-clearance plate-style front bumper for the SCX24 C10. Itdoes require trimming the front of the body under the grille.
Front body lift post mounts will lift the front body up higher and has a spot to superglue in 1/4"x1/16" (~1.6mmx6mm) magnets. This reduces trimming required and also helps the wheel wells clear the tires, particularly with larger-than-stock tires. Printed this out of 100% infill PETG.
It also has no light holes - I moved my lights to the body headlight position, which I think looks more scale anyway.
I printed the bumper upside down and the stinger flat, then superglued them together. This keeps the layer lines and surface finish in an ideal position for both parts. So far printed out of PETG it has been plenty strong.
Update: I added an extra high clearance version of the bumper that I modified to work with scrambler tires. (And also requires body lift plus shock lift.)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
200
Infill:
40
Filament:
AmazonBasics PETG
Notes:
Printed with 6 perimeters for strength.
Category: R/C Vehicles