Carisma Shock Mounts for SCX24
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of upper shock mounts for putting Carisma shocks on an SCX24 deadbolt or C10. I used M1.4x6mm screws to…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a set of upper shock mounts for putting Carisma shocks on an SCX24 deadbolt or C10. I used M1.4x6mm screws to give it a little extra grip vs the factory M1.4x5mm, but the shorter screws would probably work.
Carisma shocks bolt straight into these, and they're raised up to not lift the crawlers too much. On the C10, I also lifted the body of my truck so it may not work exactly on yours. The deadbolt should work fine vs stock, probably. YMMV
The Deadbolt rear shock tower is the same left to right. The other ones are labeled for passenger or driver.
I also designed these to fit scrambler tires on both vehicles. For the lower shock mount, I just reused the lowers off of the original SCX24 shocks.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
200
Infill:
50
Filament:
Overture PETG
Notes:
6 perimeters for strength
Category: R/C Vehicles