1 / 4
Original Prusa Enclosure Bottom Front Cable Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of enclosure top cover to fit bottom front hole.
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 293
- Wydruki
- 18
- Wyświetlenia
- 939
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 18) (Komentarze: 28)Remiksy (0)Kolekcje (165)Powiązane
I wanted to have a cover for the front bottom hole which fits snuggly to the display cable. This model and its tilted hole fit the display cable including the protection sleeve.
I printed it in TPU with shore 94A, this way you can twist the part and slide the cable easily into the hole. Not sure how good the long term thermal stability is but the TPU should be thermally stable up to 115°C.
You can use one of the spare sidepanels rivets to fix it in place.
Changelog
- 2024-03-29: Uploaded version which has no hole in it. Uploaded it as STL and as STEP file.
- 2024-01-12: Added version with 11mm straight hole, I use it in the cut out of the rear wall.
Print settings
- Material: TPU / Flex (Shore 94A)
- Nozzle diameter: 0.4mm
- Layer height: 0.2mm
- Infill: 15%
- Supports: Not needed
- Print with top side facing the print bed.
- Printed on textured sheet.