NIU scooter hidden windshield AIRTAG Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solution to mount (and hide) an Apple AirTag on a NIU KQI E-Scooter behind the windshield.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy to print in PLA but PETG will work as well.
I recommend to get two little longer M5 screws (pic No. 6) to mount the AirTag holder with the factory mounted plastic cover in between handlebar and windshield. It works with the original screws but there will be not as many threads used and they might break out, but you can give it a try and see if it works for you.
There are several mounting options Pic No. 7:
- Like factory mounted windshield position (AirTag will be visible)
- Turned 180° - I use this because the Airtag is hidden (I use it like this)
- Without the plastic cap between handle bar and windshield. ← With this option you can use the two factory M5 screws. (Pic No. 6).
I Printed both parts in PLA with a 0.20 layer height.
Like you can see on pic No. 1 and 2, you can easily break out the support-structure where the AirTag will be in.
Screws used:
3x M2x8mm