Autoclave reactor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tabletop reactor model
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 680
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
My first design after acquiring a 3D printer… Being a chemical engineer, I reckoned that I should model a reactor of sorts and produced this design using Fusion. Although the legs are a bit skinny and the flanges do not match the reactor's "pressure rating", I wasn't too disappointed with the result. It would make an awesome nerdy beer glass (in which case it is advisable to plug the bottom drain).
The lid can be screwed down using printed M6x20 nuts and bolts that can be found elsewhere on Thingiverse / Prusa.
I suggest to use a tree support to prevent the vessel's legs becoming encased in scaffolding (which is what I obtained using default Cura settings).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts: No
Supports: Yes
Resolution: 200
Infill: 20%
Filament: PLA
As you can tell from the line pattern, the shell was printed lying horizontally. The surface should be smoother when printing upright, but I have not tried this yet - working on a cyclone vacuum cleaner!
Category: Buildings & Structures