Lit Christmas Tree Topper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A customizable Christmas tree topper design with lighting
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1083
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Topper for your Christmas tree.
Print the support shaft and ball, then choose a type of spike to your liking. a small dab of glue to hold each piece together (they should snap together to make gluing easy) and you should be good to go.
**SPIKES ARE VERY SHARP, USE AT YOUR OWN RISK**
pictures are combos of cookiecad funfetti pla filament, and isanmate glitter rainbow pla+ filament
link to light used is https://www.amazon.com/YCeru-Flexible-Emergency-Lighting-Bathroom/dp/B09Z9R9J48?th=1
the funfetti used seems to go in and out of stock, so keep that in mind
Print settings i used
support shaft and ball:
2 walls, 2 bottoms, 2 tops. tree supports, inner brim , gyroid infill
4spikes, nubs, and pyramids:
1 walls, 2 bottoms, 1 top, lightning infill, enable normal support
Cones:
1 wall , 0 top, 0 bottom, outer brim for printing multiples (can be printed in vase mode individually)
licensing available https://www.patreon.com/MyrtleBeach3D/