1 / 4
Super fast flute (cover open end with finger for sound) — zdjęcie 1
1 / 4

Super fast flute (cover open end with finger for sound)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A really simple flute that's quick to print. It's open ended, but hold your finger over the end when you blow into it,…

Ocena
4 / 5
Polubienia
4
Pobrania
68
Wydruki
1
Wyświetlenia
482
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution

A really simple flute that's quick to print. It's open ended, but hold your finger over the end when you blow into it, and you'll get a loud noise.

You can also use this model to tune the minimum time per layer you can print (under slic3r's Filament -> Cooling tab, default is 15). I have a fan, and I've printed it with 4 seconds per layer, and it came out fine. With those settings, the flute took 15 minutes to print.

No support should be necessary. Remember to look at the output gcode and scale it up or down as necessary to avoid infill on the round sections, it should only need 2 perimeters. With my 0.35 nozzle, I can scale it to 90% to avoid all infill.

The flute in the picture was printed with a brim, but that was a mistake. No brim has been necessary.

Tagi