Ice scraper with replaceable blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple ice scraper with replaceable blade.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Simple ice scraper with handle and replaceable blade. 0.05mm tolerances. V2 of the handle adds a hole through the handle per the photo. I would recommend printing both pieces vertically as in the .3mf file. I printed at 0.2mm layer height and with PLA but you could easily print with thicker layers and PETG without much difficulty. PETG would likely give a little better heat resistence for keeping the scraper in the car throughout the year. I would love to see some makes and hear whether or not the design is helping get the ice off those windshields! Good luck and happy printing!