1 / 2
1:24 R/C Snowcat electronics box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didnt like the one he made because it was really weak and did not fit well, so i made my own.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
It uses m3 heatset inserts and bolts for the lid, its designed for a smaller 1500mah pack. I used some velcro to attach it to the snowcat but you could also use glue.
You will have to print with supports for the inside but set it to 85% overhang so you dont get too many anoying supports. The tolerance for the lid it 0.1mm so if ur printer cant handle that use horizontal expansion.