1 / 2
DUMMY 13 - v2 - Way too realistic high-heel-booties (2 variants)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the name says
- Ocena
- 5 / 5
- Polubienia
- 393
- Pobrania
- 1758
- Wydruki
- 6
- Wyświetlenia
- 6672
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (5)Kolekcje (651)Powiązane
Based on DUMMY 13 Beta - Oct. 2023
| DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 |
Both variants are usable with the original parts (toe, ankle).
- They are impractical
- DUMMY may not be able to stand properly in them (improved in v2.x)
- There are only a few moments when such boots make sense
- BUT they look hot
- And that's why they will be downloaded
- Like in real life…
As already said, way too realistic ;)
Print with supports and brim @0.15mm or less layer height.
Have fun!