Ender 3 / Ender 3 Pro X-Axis Cover With Adjustable Endstop Position
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows adjustment of Ender 3 / Ender 3 Pro X-axis endstop switch offset while using original cover screws & endstop.
- Ocena
- 4 / 5
- Polubienia
- 45
- Pobrania
- 306
- Wydruki
- 1
- Wyświetlenia
- 1385
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Allows adjustment of X-axis endstop switch offset. I needed something like this since the stock bracket for the Sprite Extruder kit has a protrusion that creates an ~5mm offset/print area loss from stock. I didn't care to modify that metal bracket unnecessarily.
When assembled with the parts list below the endstop board clears the older-style X stepper assembly my circa 2019 Ender 3 Pro has with a set-screw pulley & longer shaft with room to spare, should also clear the newer style press-fit assembly.
Non-printed materials used:
- 4x OEM X cover M3x40 screws
- OEM Endstop switch from original cover
- 2x M3x12 screws (endstop mounting)
- 2x M3 bolts ~2.5mm thickness (endstop mounting)
Printable materials used:
- 2x Ender_3_X_Axis_Motor_Cover_with_Adjustable_Endstop_SPACER
There is some allowance for tolerance in the screw holes and sizing, however this is best printed on a well-adjusted, accurate device.
Print oriented face-down with supports under the X endstop adjustment channels. I used PETG with 50% cubic infill and 0.16mm layer height for strength.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
50% Cubic
Filament: Overture PETG Black