VEX IQ to Pegboard Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount VEX IQ parts on a pegboard!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v2.0
This is an adapter that lets you mount VEX IQ parts on a pegboard. One end is a VEX IQ pin, and the other goes into the pegboard. The 1 inch hole pitch of most pegboards lines up nicely with the 0.5 inch hole pitch of the VEX IQ system.
The pin holds strongly but does require a bit more insertion force than a normal IQ pin. Depending on your support material, a tiny bit of trimming around the edges of the pin might be required to get it to go in smoothly.
The pin probably isn't good for as many repeated insertions and removals as the real thing, either.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12 mm
Infill:
60%
Filament:
Creality PLA
Notes:
Lower resolution and infill might work OK, but since it's a relatively small part with some fine details, and might bear some load, I wanted to make sure there was plenty of structure.
Category: Robotics