Drawer Cover Fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fixture connects your drawer covers with the linear silders.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
For example in your kitchen all of your drawer covers are fixed to the linear rails with fixtures like these. Usually these fixtures are made out of cheap cast metal and will break over time.
Because it could be hard to source those fixtures by the original manufacturer I felt free to model one and just print them out.
(Don't worry the top smaller hook doesn't connect to anything in most applications)
Please print it laying down for a stronger part
0.4mm Nozzle
0.15mm Layer height
I chose 35% of Infill
Made out of PLA (in this application PLA is more than strong enough)