Ultimate 64 | UserPort Adapter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an (external) case for the Ultimate 64 UserPort Adapter. I didn't want to modify my original C64C case (by…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is an (external) case for the Ultimate 64 UserPort Adapter.
I didn't want to modify my original C64C case (by cutting extra holes, etc.) to install this port.
So I decided to run the cable through the existing cassette-port; which I don't use anyway.
The case has a stand which brings everything in an upright position; making it easier to exchange cartridges.
Its elevated placement also makes it easier to read the WiC64 display. ;-)
Note: You'll need two tiny screws to fixate the PCB.
Enjoy!
Category: 3D Printing