USB Port for Empty Switch Port - Toyota Highlander 2013
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend of mine wanted me to make this for his 2013 Toyota Highlander, so this should work for similar highlanders…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 867
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A friend of mine wanted me to make this for his 2013 Toyota Highlander, so this should work for similar highlanders and models in general. Printed in two pieces to help lock the USB port into place. I tried to make it parametric but I'm not the greatest at that lol.
Printed on a Qidi X-Max 2
Print Settings
Printer Brand:
QIDI
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15%
Filament:
GizmoDorks ABSBlack
Notes:
I would recommend printing this in ABS, ASA, or something with a similar glass transition point, as it's going into a vehicle
Category: Automotive