Actually Stackable Batteries Beer Crate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added some extrudes and cuts so that the crates are actually stackable and easier to print
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 324
- Wydruki
- 2
- Wyświetlenia
- 2199
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
So I decided to add some extrudes and cuts on the amazing original models made by CAD-Guy as these would slip and fall. This remix is easier to print and the extrudes allow for the crates to actually be stackable.
Can be printed with 0.3 Layer Height, 2-3 Perimeters and 10% Infill Minimum.
Supports are not needed but recommended for better results.
Hope you liked and successfully printed the model!! If so, please consider buying me a coffee so that I have more energy to create even more models :-D
https://buymeacoffee.com/miguel2811
Happy 3D Printing :-D