1 / 3
DICEY GAMBLER
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hextraction Tile
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
A tile for the 3d printed board game Hextraction created by Zack Feedman
johnlattanzio98's Dicey Destroyer tile gave me the idea for this tile. Check it out here.
https://thangs.com/designer/johnlattanzio98/3d-model/Hextraction%20Dicey%20Destroyer%20Custom%20Tile-883999
As you can probably imagine, the rules are if a ball gets stuck on the magnet (2 - 3 tiles of speed will bypass it), roll a die to decide the balls path. 1&6 goes left. 2&5 goes down. 3&4 goes right.
I got the magnet for this on temu. It says its a 5x5x5mm cube magnet but its actually 4.5mm cubed. I made the hole to fit it perfectly on my P1S but I still used a little hot glue to secure it.
MAGNET LINK
https://share.temu.com/MyPy6jooStA
Make sure to select the 5x5x5 before ordering
I have not made a rules card for this. Sorry