Filament Spool Container with Feet Tabs Removed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament spool container with desiccant storage for use on spool shelving.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model by K2ij3 was great, but since I am using this on shelving as opposed to stacking my containers, I cut the tops and bottoms off the container and lid to reduce the size of the model and preserve shelving space. It also reduces filament usage a bit and speeds up the print time.
I found that I only needed 8 M3x40mm screws and did not need threaded inserts as recommended by the original designer. Since nothing is putting force that would pull the screw out or push it in, the threaded inserts shouldn't be required.