Umbrella corporation plaque
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a thing for the Umbrella logo so I decided to make one for myself. It's quite chunky so it can stand on its own…
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 357
- Wydruki
- 7
- Wyświetlenia
- 1600
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a thing for the Umbrella logo so I decided to make one for myself.
It's quite chunky so it can stand on its own but you could always trim off a bit in the slicer and just lean it against something to cut down on the print time.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
5
Filament:
Prusament/Primavalue PLA
Black/Red/White
Notes:
A filament switch is required for the text, I simply paused the print when it reached the first text layer
Post-Printing
I couldn't quite get the logo pieces (umbrella arrow.stl) into the pockets so I took a knife and cut just a tiny bit around the edges of the bottom and then they simply snapped in. Also make sure the corners are sharp.
I ended up not even using glue since I can't get the damn things out.
I suppose if you'd prefer it you could just scale the pieces down maybe 0.5% or so and glue them in