Glasses Holder for Asus ProArt Monitors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a glasses holder that you can put on top of monitors that have around 1mm of bezel specifically Asus Pro Art.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this glasses holder for monitors with a 1mm bezel. I use an ASUS ProArt Display PA279CV 27" for my office work and have two sets of glasses - one for regular use and one for computer use. I always forget to switch to computer glasses when working on the computer. So I made this for ease of switching between the glasses.
Printing instructions:
Please print the models in the orientations as shown in the last picture.
It's modeled for PLA. For ABS/ASA or other materials that shrink, you might need to scale up the models by 0.5% or so. Otherwise the fitting will be too tight and you won't be able to assemble them.