1 / 17
Lack Enclosure HEPA Air Filter and VOC Activated Charcoal Pellets — zdjęcie 1
1 / 17

Lack Enclosure HEPA Air Filter and VOC Activated Charcoal Pellets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Air filtration system designed for fine particulates and charcoal to absorb VOC emissions, can be printed on a Mini.

Ocena
0 / 5
Polubienia
8
Pobrania
19
Wydruki
0
Wyświetlenia
552
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

In a previous design for an air filtration system I had to cut away into the plexiglass in the lack enclosure and added a screen material for the charcoal pellets. In this design I used the Infill percentage removing top and bottom layers in the base and tray to create a permanent screen filter. The fan mount is the only piece which requires hardware Bolts and Heat Sets, the air filter stays in without the cover which is attached with magnets, everything else is interlocked, press fit or held with a printed screw.

80mm 12V Fan

Roomba HEPA filters
Activated Filter Carbon Pellets
8x3 Magnets
 

Tagi