Rocket Lab Electron 1/40th Scale Launch Platform and Strongback Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty remix of brandonjm's version scaled up 150% to make it 1/40th scale so that it can fit the Rocket Lab…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
Quick and dirty remix of brandonjm's version scaled up 150% to make it 1/40th scale so that it can fit the Rocket Lab Electron by AstroNot. I had to split the strongback arm into two parts and glue them together as the whole thing was larger than my printer's z-capacity.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
5
Filament: Overture PLA Black
Notes:
I would hike up the infill for the platform to around 30-50% to add some heft, though it may take longer to print. I did print with 4 walls. I only used a 5mm brim for adhesion and enabled supports only for the two parts of the strongback arm. I printed the lever and the grip parts all in one go. It took less than 2 hours with the CHEP extra fast 0.28 profile
I recommend sanding the hex portion of the lever arm with some 220 grit sandpaper for a better fit between the Platform and Strongback Pivot. It does not take much, just creep up on it.
To connect the grip parts, I used a Jimmy Diresta ice pick to widen the openings slightly and some black filament as the pins. Melted the top and bottom slightly with a heated Xacto blade so they don't fall out.
Everything else glued with Starbond Medium CA glue and accelerator.
How I Designed This
Opened brandonjm's original files in Cura 5.1.0, scaled to 150%, reoriented and saved.
Category: Buildings & Structures