Gridfinity USB-C Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB C holder for a 1X1 Gridfinity. Holds up to 8 USB C drives. Spacing is wide enough to hold most flash drives
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 611
- Wydruki
- 8
- Wyświetlenia
- 1257
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
USB A holder for a 1X1 Gridfinity. Holds up to 8 USB C drives. Spacing is wide enough to hold most flash drives or adapters. Designed this to replace my old non-gridfinity holder that I have used for many years.
Slight taper in the pockets, to help lock in the USB devices when inserted. Slightly oversized for a snug fit, without being too tight.
Print with the gridfinity base down. I normally use supports for the magnet holes. Any layer height should work, I use 0.2mm.
Need USB A instead? Check this out: https://www.printables.com/model/661177-gridfinity-usb-a-holder
Need USB A & USB C? Check this out: https://www.printables.com/model/661214-gridfinity-usb-ac-holder