Bento Box V2 Base for boost converter with switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A BentoBox V2 bottom for a switch and boost converter.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 1534
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It uses the same DC Booster Converter as the original:
https://www.amazon.com/dp/B0B7HN1NRF
The switch model I chose:
https://www.amazon.com/dp/B07XD8J2PL
I expect others will fit as well.
Threaded inserts:
https://www.amazon.com/gp/product/B0B398W1CC
To mount the BentoBox fan unit, you'll need M3 Threaded Insert OD-5mm L-4mmBrass Nut Knurled Inserts. Easy to sink into the plastic with a sufficiently hot soldering iron.
There is additional clearance (and 4 mounting pegs) to hopefully accommodate other boost converter models more easily.
The bottom is slotted to mount inside a Bambu Labs X1, and the chord is a standard USB cable that should fit through an existing hole in the left rear of the unit.
