1 / 1
Skaldis Filemant Spool Holder (Center and Adapters) — zdjęcie 1

Skaldis Filemant Spool Holder (Center and Adapters)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Center piece and adapters for bars of the Skaldis Filemant Spool Holder (original)

Ocena
5 / 5
Polubienia
7
Pobrania
33
Wydruki
2
Wyświetlenia
392
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Adding a center piece for the original model.

This can in combination with the adapters used to hold multiple spools per printed part.

The bars used have a diameter of 18mm (smaller can be created on request), but I used a wodden bar cut down to 20.5cm to hold 3 Bambu spools per segment.

Thanks for the original: Skaldis Filemant Spool Holder from @Finsterwald_715280.