Pentax 6x7 67 Shutter Speed Dial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed in Creo, Measurements taken from camera The Design is symmetrical, so you can flip it. If there should be any…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Designed in Creo, Measurements taken from camera
The Design is symmetrical, so you can flip it. If there should be any issues, message me and I can modify it.
Used to change shutter speeds easier on a Pentax 6x7 and 67. This thing gets lost easily, thats why I constructed a replacement.
the first version had a too small inner diameter, the second version printed in PLA on my Ender 5 fits tight. It is designed with a tolerance (outer diameter dial is 28mm, inner diameter print is 28,3mm) and with the surface roughness it fits tight. The clearence for the indicator lamp (battery check) is there and if you print white or transparent you see it also with ring attached.
The super "huge" version 2 is a more detailed and closer to the original model designed version. It should fit just nicely and is easier to print. No support or rafts needed
How I Designed This
Category: Camera