MimimICE (scraper for your car-window or printer-bed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, quick to print, low on filament usage - minimalistic = MinimICE
- Ocena
- 4,857 / 5
- Polubienia
- 80
- Pobrania
- 403
- Wydruki
- 7
- Wyświetlenia
- 1548
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
| Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my popular models |
This is just a simple and quick to print icescraper - print and toss it under the car seat to be ready for winter! With a nice textured handle, it's easy to grip, even with gloves on! Such a minimalistic yet functional design can only be named one thing: MinimICE!
(Want a more 'futuristic' design, then maybe try this one):
https://www.printables.com/model/660904-futuristic-ice-scraper-simple-yet-detailed-from-th
Overview
The model comes in 4 sizes - and all sizes in 2 styles.
Sizes are defined by the width of the scraper ‘blade’:
- 75 mm
- 100 mm (the one on the photos)
- 125 mm
- 150 mm
The 3 styles are:
- Solid (can be printed with exposed infill if wanted)
- Outline (the one on the photos)
- Outline (strong) (as outline, but with a stronger handle)
Assembly
None - print → you are ready.
| More practical prints? I got you covered! Check out this collection of practical models - everything from tools to storage solutions. Or maybe see this collection of tool models |
Print instructions
- Orientation: All files should be printed as they are imported.
- Supports: No
- Layer height: 0.2 mm (or lower to get as smooth a blade as possible)
- Walls: If you choose the outline version, maybe increase the Walls count a little, to avoid tiny infill bits.
- Top/Bottom layers: Default 3-5 - or 0 if you want to show the infill of the Solid versions.
Happy printing!