Rimfire Thickness Tester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instead of paying upwards of 40 bucks for a nicer tester gauge I decided to make my own.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple testing gauge for rimfire rim thickness.
If you have a set of dial or digital calipers this should fit most all of them.
In my case I used an old machining vice to hold my calipers in place to get better
more accurate readings.
This is my second version which will be my final edit. I basically removed the through hole so that the area up inside of the gauge would have a more secure surface to sit on. I have been using my 1st design for several months.
Print the model as seen in the pic so the hole is face down. I used .15 layer height and 3 perimeters. In my case I used a brim to help secure model to bed. Once model is finished I would recommend placing it on your calipers and rub the surface back and forth a few time to remove any printing remnants like strings and such.