1 / 1
Elegoo Neptune 3/4 Anti-Vibration Feet (TPU Remix) — zdjęcie 1

Elegoo Neptune 3/4 Anti-Vibration Feet (TPU Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Aleksandar Todorovic's excellent anti-vibration feet with added structure for use with TPU

Ocena
5 / 5
Polubienia
39
Pobrania
330
Wydruki
1
Wyświetlenia
2283
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

3/11/24 Update:

Tried several variations, settled on a remix of the popular Bambu anti-vibration feet. Use these instead:

TPU Anti Vibration Feet Neptune 3/4 by JayDub1791 | Download free STL model | Printables.com

12/1/23 Update:

Preface - if you're not familiar with input shaping terms the following will sound like a foreign language (it did to me at first). If you want to read up on it go check out the Klipper documentation: Klipper Resonance Compensation

I ran input shaper values on my Neptune 4 Pro and the X-axis improved significantly, from 59hz EI to 37hz MZV (recommended max_accel value was 15,800 - damn). Unfortunately the Y-axis tanked, even moving the accelerometer to different spots on the bed the best I could get was 3HUMP_EI at 113hz, with a max_accel of only 2900 before input shaping starts smoothing away small details. I ended up printing a second set of these feet and stacking them perpendicular to reduce vibration in both directions. This gave much better Y-axis shaper values (59hz MZV) allowing for an overall max_accel of 5900. That, however, is a GIANT pain in the a$$ as the feet wanted to slide off each other as I tried to position the printer correctly, so I'm not recommending it. My solution is to fully redesign this as a uni-directional foot with enough structure to be printed from TPU. It would be easier to just go with a squash ball foot, and these are probably unnecessary, but I'm crazy so here we are!

TLDR: These helped the X-axis on my Neptune 4 Pro a lot but made the Y-axis considerably worse. Wait for my re-design or use the squash ball feet that are out there. YMMV of course.

 

Tagi