BIFRC spot welder snap fit case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snapfit case for the BIFRC spot welder, no mouting screws are required. The case is a tight fit, without…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a snapfit case for the BIFRC spot welder, no mouting screws are required. The case is a tight fit, without visible gap between the case and the lid.
I used a bit of hot glue to cover the hole for the LED so the light from the LED will lightup through the semi transparant hot glue (if you don't use to much ;) )
The pcb doesn't rattle inside the case as it is kept tighly in its position.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
25%
Filament: Colorfabb PLA Black & Red
Notes:
I used Cura to slice with tree support.
Category: Electronics