Salt cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box / Salt Cellar / Salt Cube for storing salt flakes in which shows off the infill pattern.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 198
- Wydruki
- 1
- Wyświetlenia
- 1053
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a simple box for storing sea salt flakes, the internal corners are rounded to avoid the contents getting stuck in there. Print with transparent material to show off the infill pattern created when you slice in Cura - I used cubic, but you can experiment with different options. Has fairly thick walls and curved internal edges to avoid salt getting trapped in the container. Best printed with a food safe material. I used transparent PLA, but transparent PET or similar might work better.
Prints fine without supports (you might need to flip the lid over) at 10% infill.
Read more about making a salt cube for fancy salt on my blog.
Print Settings
Rafts: No
Supports: No
Resolution:200
Infill: 10
Filament: PolyMaker PLA Transparent
Category: Containers