Cable Management for GUSATOLAS CXYDM Vertical Heat Pressing Machine & Heat Set Insert Tool & Tip Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This safely keeps the electrical cable away from the hot end of the soldering iron. Also a holder for your extra tips.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 1234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Make sure and share your makes and if you like it please give it a ❤ LIKE!
UPDATE: Just added a Tip Holder! You will need 2 5mm x 8mm bolts and 2 5mm nuts.
I noticed when using the device that the electrical cable would sometimes come uncomfortably close to the hot tip of the soldering iron. I wanted a way to safely keep the cable out of the way that didn't hinder the range of motion of the tool. I designed this simple add-on and it does the job great.
Here is a link to the tool this print is for: https://www.amazon.com/dp/B0C7D34CL4
You will also need:
- 1 - Heat Set Brass Insert that is 3mm x 4mm x 5mm (For 3mm bolt, 4mm deep and 5mm outer diameter)
- 1 - 4mm x 8mm bolt
- 1 - 3mm x 6mm bolt
Here is a video showing how to put it all together and how it works: