1 / 4
KO 2 Fader knob - Teenage Engineering EP-133 K.O. II Fader — zdjęcie 1
1 / 4

KO 2 Fader knob - Teenage Engineering EP-133 K.O. II Fader

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you are here, you know about the issues with the fader / slider on the KO II This faderknob has more room for fit.

Ocena
0 / 5
Polubienia
18
Pobrania
240
Wydruki
1
Wyświetlenia
2243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force.

This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver. Printed top down.

Because of different calibration and tolerance on different printers/filament, I would advise to scale the model in tiny increments if you get a bad fit.

 

Tagi