1 / 7
Holiday Gift Bow/Ornament- Easy to Print and Fold Bow — zdjęcie 1
1 / 7

Holiday Gift Bow/Ornament- Easy to Print and Fold Bow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An ornate bow to help anyone look like a master gift wrapper. Can also be hung as an ornament.

Ocena
4,964 / 5
Polubienia
477
Pobrania
1367
Wydruki
29
Wyświetlenia
5769
Oceny
28

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A red bow I saw posted on Reddit like this was super cool but kinda small and plain. I really liked the idea so I decided to go bigger and more ornate. This model uses about 18 grams of filament and took a little under 2 hours to print. The best part is that the center post is a screw for the retention button so no glue or creases required. Regular gift ribbon can be used to tie it to a box or it can be hung as an ornament.

 I suggest using:

3 walls 

3 solid top/bottom layers

0.2mm first layer

0.1mm layers after that (Petals are 0.4mm thick and this ensures pliability and strength)

10% infill

 Per user @fuze, “{set} the infill direction set to 0° (from 45°). This time I could fold it without anything breaking.”

Or: Use concentric as the top and bottom surface patterns with rectilinear as the solid infill pattern. This also helps keep the fold rounded. 

 

Update: Some users have reported to me that it will print fine at a 0.2mm layer height. Feel free to experiment with your settings. Every printer is unique and no one knows yours like you do. 
 

a video of removing it from the build plate and assembly:

https://youtube.com/shorts/hV2QSaqjz2U?si=9zLPUTxeKl5mxqBI

Tagi