Anti-tangle spool holder remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EDIT 6.April 2021: I added roll consist of 2 parts roll_hole.stl roll_slot.stl You need 8x 8x16x5 ball bearings I…
- Ocena
- 4,5 / 5
- Polubienia
- 68
- Pobrania
- 209
- Wydruki
- 2
- Wyświetlenia
- 2525
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT 6.April 2021:
I added roll consist of 2 parts
roll_hole.stl
roll_slot.stl
You need 8x 8x16x5 ball bearings
I added all files needed for assembly.
Original comment:
This remix of the graham01 anti tangle spool holder
https://www.thingiverse.com/thing:2479238
Works well with my precise filament guide.
https://www.thingiverse.com/thing:4808416
I apply some changes:
I see some remixes ideas very clever and useful. So I ended with this:
https://www.thingiverse.com/thing:4689700
I made my own roller in one piece inspired by
https://www.thingiverse.com/thing:3020461.
But I added 0.2 mm blinded cap so it has better bed surface contact so better stability.
And I cut some volume of the cross beam to be able to print it laying down on bed instead of printing it at standing position.
Print Settings
Rafts:
No
Supports:
No
200
Infill:
20
Filament:
PolyMaker PLA
Category: 3D Printer Accessories