1 / 2
2 inch ice fishing jig lure v2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly better version of my original ice jig.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 189
- Wydruki
- 2
- Wyświetlenia
- 1235
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (32)Powiązane
This lure is a little thinner than v1, the weight and hook hanger are closer to the front, and there's a spot for an eye. I also changed the slots for wire to make it easier to assemble.
To assemble:
- Print original as well as a mirror of it in 0.1 or 0.15 mm layer height and 100% infill.
- Bend wire for hook hanger and line tie.
- Glue wire and BBs (for weight) into the bait and glue the two halves together.
- Attach a trebel hook with split ring.