V-Slot Covers for Sovol SV06
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V-Slot Covers for every exposed slot on your Sovol SV06
- Ocena
- 4,75 / 5
- Polubienia
- 41
- Pobrania
- 319
- Wydruki
- 4
- Wyświetlenia
- 990
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Tested different V-slot covers available on this site, as you can see on the makes on my profile, this was the best fitting cover, has a very good press fit but is still easily removable.
Available you'll find a file containing every cover you'd need to print along with g-code for the SV06 if you want to skip the slicing part. Or different files for each extrusion. I printed half the needed covers to test fit first.
Horizontal slot uses 2*172mm covers
Vertical inside slot uses 2*182m covers
Vertical outside slot uses 2*184m covers
No supports needed.
I printed in PLA (specifically Sovol PLA) but probably works with basically every other filament.
I did not print the bottom slots for the horizontal extrusion, since I don't think I needed those, if you want to, they are probably the same as the top part of the horizontal extrusion.