Artillery Sidewinder x1 - Gantry Support Remix4 BL-Touch edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the original ss I have a BL-Touch I have my bed at stiff as possible, running it lower than original.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
As I have a BL-Touch I have my bed at stiff as possible, running it lower than original. On the original version I hit the braces 1,5mm before actually reaching 0.
Really the only adjustment is removing a few mm from the top of the braces to make room for the Z-axis get lower. It's not perfect but it should work. "Should" because I still need to reprint after adjusting the original.
Because I am printing at a high layer-width I adjusted the screw-holes to have a tiny bit more space for screws to enter which made for a perfect fit.
Update 17-01-2021
Added Left-Triangle-Support-v3. This version is 5mm lower than the v2 to allow for a X-belt tensioner to be installed (https://www.thingiverse.com/thing:4726382).
I moved down the sides "hugging" the 2040 extrusion as much as possible and lowered the top-middle bit by 1mm to minimize the impact on the structural integrity but still make sure the t-nuts can rotate.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament:
Azurefilm PETGTransparent Dark Blue
Category: 3D Printer Parts